MicroMD EMR
137 results found
-
Provide the ability to "deselect all" when editing Portal Update records
At present when editing portal update records the system defaults to "Include all" and there is no option to "exclude all" so that the provider might selectively determine which portions of the CDA to publish to the patient. This has resulted in a serious workflow problem for my providers. For example, an 80-year-old patient who has been seen in the office multiple times in the last few months is receiving a full CDA every time there is an update to her labs or other related records. In order for the provider to selectively send only the lab related information the…
1 voteDuplicate of internal id 25666 completed in version 13.5.
-
alphatize quick text manager
I have problem to locate the templates that I have made before , to edit
1 votever 18
-
CQM Reports show criteria met
Quality Improvement team would like the CQM reports to show how the patients met the criteria for the numerator.
For Example: NQF0059 (Diabetes by A1C)
This report puts any patients into the numerator that 1) had an A1c greater than 9% during the measurement period, or 2) did not have an A1C performed during the measurement period. The EMR has to know which of the criteria the patient met in order to be in the numerator. So can it not give us that information?I need to know out of these patients, which ones had a high A1C and which…
1 voteEnhancements made to show patients in numberator, exceptions etc. If additional report is necessary speak to your support rep for an available report or custom report.
-
Stage 2 Core 1B - Radiology orders
Consider looking for the procedure codes in the Referral order (currently they look ONLY for Procedure orders, which they do not order this because it is not done inhouse). This is an extra step of creating orders and marking them done that could be eliminated by looking for the procedure codes in the Referral order section.
1 voteEnhancement completed in version 13.5 . ref id 24844
-
The PM assigns inaccurate classifications to appointment requests made from the EMR.
When an appointment request is made from the EMR the provider has an option to select an appointment type. On the PM side, when the request is dragged over to a schedule the PM incorrectly assigns a classification to the appointment. The best solution would be to link this between the PM and EMR. This could be done by allowing the PM classifications to be selected in the EMR when the appointment request is made. In the EMR this is labeled Appt Type. I understand from support that this is "working as designed" but seems to really be a mapping…
1 voteEnhancement completed in version 14.. ref id 16905
-
Adding Secondary Insurance Fields In Administrative Form Templates
Most of the EMR clients use these forms to send to surgery centers to reserve a time for their patient's surgery. Filling out these forms by hand then faxing them is very time consuming for a practice. With the Administrative Forms and Interfax this task becomes less time consuming. The problem is most of these surgery centers require a secondary insurance. In order to accomplish this currently, the practice needs to add this. I would like to suggest we create a field for this to pull in like the Primary Insurance
1 voteThank you for the suggestion in the future version 13 the plan set concept will be introduced in the EMR which in turn will allow additions to the EMR Admin forms and other areas to have fields for primary, secondary and tert. and the selection of the specific set that will merge.
-
Add User Groups or allow multiple recipients for reminders
Var Name: Main Street Medical
Client Name: Dr. James Bay
Contact Name: Jim Popp
Description of Request: In the New Reminders dialog, allow the "To" block to be populated by multiple recipient names (like mail messages), or make user-defined groups available in the list of users who come up when the "To" button is clicked.Requested Steps to define spec: Either method would allow more than one user to be aware of reminders when they come up on the desktop on the target date of the reminder, and also allow those multiple users to see the reminder under "Reminders" on…
1 votever 18
-
Portal Message Needs QT option
It would be nice to create some standard QT options for the patient portal messages. "Lab results are normal. Please call the office for any questions" or "Your medications list was changed at your last visit. Please review and call the office if you have any questions." The person pushing the messages shouldn't have to type those standard messages every time.
1 voteCompleted in version 12.
-
ABN Form modification needed based on CMS requirements - Full Address and Phone necessary
The practice's full address and phone are required to be on the ABN form. Current form only includes address line 1 and no phone number.
1 vote -
Ability to have an open box of medical chart info - while documenting the note
have a user preference to keep open a medical summary or dashboard type of tool while the note is being documented so that providers can quickly scroll through key medical data while charting without having to click and drill.
1 voteCompleted dashboard can be open and access details while encounter is still open.
-
Discrete clinical data import from patient portal or kiosk
Add a feature to allow patients to fill out clinical data forms and have it import as discrete data into the EMR for FASTER Registration and to ease the time burden to capture the data.
1 voteComplete in version 12.0.3 ref id 15936
-
Add ability to terminate medications from inside encounter
Add the ability to terminate a medication from inside an encounter. You currently have to do this once you finish the encounter by then going to the medication screen. This is an extra step. When the provider is face-to-face with the patient they should be able to terminate a medication the patient says they are no longer taking without exiting the encounter.
1 voteThank You for the suggestion the item is a duplicate of a planned item for a future version. ref id 13495 ver. 10.5
-
Billing Report
Need to be able to run a report that will reconcile PM and EMR charge entry items by line.
All items entered in EMR and marked as BILL = YES needs to be listed in PM and a report of any items that don't match should be able to be generated. It should cover the line by line items under the sequences. There should be a check/balance of charges that match the encounter and anything that doesnt match there should be a report that generates those patients with sequences/items missing
1 voteThank you for your suggestion however this is a duplicate suggestion that is in the planning stage for ver 10 ref 17987.
-
Reply to a different user in Phone Messages
Client Name: Sievert #3860
Date: 9/30/2014
Contact Name: Susan Lee
Contact Email Address: slee@innovativeitinc.com
Contact Telephone Number: 559-573-3476PM or EMR Feature Request: EMR
Description of Request: Ability to reply to a group of people or a different person in Phone Messages instead of the person who created the phone message.
Requested Steps to define spec:
1. Go to Phone Messages in the Desktop Navigator
2. Select Phone Message
3. Click Reply
4. In Message To:, select user(s)
5. Click SendExpected Result:
to send the message to another person or to a group of people.Current Result:
currently, there…1 vote. ref id 19390
-
Add Appointment Class to Field Name in Patient Appointments report template
Add the Field Name for Appointment Classifications to the Query in the Patient Appointments Report template. The Appointment Classifications should be the ones used in the PM that is linked to that appointment. When running this report, it would help to have the Appointment Classification pull as well that way the users can send letters to patients with a certain appointment class or separate those in the reports if needed. When the report is generated, add a column to include the Appointment Classifications
Requested Steps to define spec:
1. Go to EMR
2. Administrative
3. Reports
4. Appointments
5. Click…1 voteThis has been updated the appt class in the PM is the appt type in the EMR.
-
Add hover text to the order window for patient demographics
Would like to see the patient demographics in hover text when floating over the patient name within an order. This will allow the user to quickly see what the demographics are without having the extra clicks and time it takes to open the patient monitor.
1 votecompleted in version 12.0
-
Increase Character Limit in Authorization Code for Procedure Order
Please increase the character limit for Authorization code in the Procedure Order from 19 to 30. Authorization codes can be as many as 30+ characters; currently the system only allows 19 characters. ALL authorization code fields in each order should allow up to 30 characters like Referral Order.
Requested Steps to define spec:
1. Open patient chart
2. Go to Medical Information
3. Orders
4. Procedure Order
5. Click on Add
6. Enter authorization number in Authorization Code
7. Click OkExpected Result:
Authorization Code will allow more than 19 characters, at least up to 30 characters.
ALL Authorization Code…1 voteThank You for your suggestion this request is a duplicate of a planned enhancement in ver 10 of MicroMD. ref id 17984
-
Patient's date of birth
Anywhere a patient's name is displayed it should also display the date of birth. This is information that practices use to identify patients.
1 voteAddition of hover with info version 12.0
-
Medication list in the encounter
When a provider reviews the medication list in the encounter. The dosage is not fully displayed. The provider is forced to click on each medication and view it in the window below the list. When a patient has many medications this becomes a very slow process. I would like to see this widow enlarged to view all the information at once. This will allow the provider to move through this process much quicker
1 voteThank You for the suggestion it is a duplicate that has a status of planned and is being reviewed by product mngmt. ref id 20725. Enhancement added to version 10
-
Report based on Chart Statuses
Client Name: Michael Dayton #3744
Date: 4/10/2014
Contact Name: Susan Lee
Contact Email Address: slee@innovativeitinc.com
Contact Telephone Number: 559-573-3476PM or EMR Feature Request: EMR
Description of Request: There should be a report based on Chart Statuses available in the EMR.
Requested Steps to define spec:
1. Log into EMR
2. Go to Administration tab
3. Reports tab
4. Patient List
5. New (to create a new template) or Run (to run an existing template)
6. Run report based on Chart Statuses
7. Filter by Patient Name or Account numberExpected Result:
in the Reference List Viewer for Report Templates,…1 voteCompleted added new reports with option for chart and reporting status selection.
- Don't see your idea?