MicroMD EMR
150 results found
-
Add template for social determinants based on the PRAPARE guide
Add template for social determinants based on the PRAPARE guide.
Expected Result: Standard template for social determinant activity so data is all collected in one place.
Actual Result: Have to put data in the PM and other areas in the EMR and some fields are not reportable.
Impact on workflow: collects all data in the EMR and makes it easier to report on and use for each patient.
6 votesQuestionair will be included in a phase of our clinic refresh within version 17.0.2
-
alphatize quick text manager
I have problem to locate the templates that I have made before , to edit
1 votever 18
-
Patient Education/Procedure Link Improvement
When you add a procedure in an encounter that is linked to patient education there are multiple clicks to add the education. Once adding the procedure you have to click(1) on Administration in the encounter ribbon, click(2) patient education, then click(3) the patient education that is linked. This opens the Patient Education window and you have to click(4) to add this document and click(5) close. (options have been added to reduce these actions see manual) If a practice has specifically linked patient education to a code once that procedure has been added, a Yes or No pop could ask would…
7 votesChanges made ref id 26527
-
CQM Reports show criteria met
Quality Improvement team would like the CQM reports to show how the patients met the criteria for the numerator.
For Example: NQF0059 (Diabetes by A1C)
This report puts any patients into the numerator that 1) had an A1c greater than 9% during the measurement period, or 2) did not have an A1C performed during the measurement period. The EMR has to know which of the criteria the patient met in order to be in the numerator. So can it not give us that information?I need to know out of these patients, which ones had a high A1C and which…
1 voteEnhancements made to show patients in numberator, exceptions etc. If additional report is necessary speak to your support rep for an available report or custom report.
-
Adding problems to problem list
Our providers would like, when they are adding a problem to the problem list from the encounter, for the problem to be greyed-out if it's already in the problem list. That way they cannot add the same problem to the problem list multiple times.
10 votesThank you for your feedback on the MicroMD product! We are pleased to inform you that this item was released in Version 19.
Onwards and upwards!
Product Management
-
Quick Text Classification
Irrespective of wherever it is being presented, all quick text shows up together. Would like for a way to classify Quick Text base don screen it is being called from to simplify Quick text entry without having to scroll through a huge list. Also, Shared Quick text vs Personalized quick text would be ideal. Add to the commonlist building to add/edit all the different types
8 votesver 18
-
Allow mail to include link to open specific Encounter
Allow users to include link to a specific Patient Encounter for ease of editing for providers. Example, Billing/Coder finds error with selected CPT, DX or missing documentation. Biller/Coder then sends mail message with problem and link to open encounter for editing/revision.
17 votesThank you for your feedback on the MicroMD product! We are pleased to inform you that this item has been completed and released in version 18.3 + of MicroMD! If you have questions please don't hesitate to contact our teams.
We hope to have further feedback and collaboration with you again soon!
Onwards and upwards!
Product Management
-
DMS needs options to print and batch custom page ranges from its documents
Often times the user will open a document from DMS that is multiple pages. The user will then need to print or fax some of those pages, but not all of them. There isn't anyway to do this without extended time and effort with PDF printing, saving new documents or rescanning documents. EMR needs to have the print custom page range built into the program without using PDF printing. Also, "batch page" should be an answer, but it's completely broken. If you batch page 1 of a 3 page document, the entire 3 pages will be batched.
9 votes -
Update Orders when updated in the Encounter
If a provider starts an encounter and creates an order for one user (say John Doe) and then, after the order is created, the provider decides to change the order (i.e., the user to which it is assigned, diagnosis, etc.), the order that is already created is not updated with this information. However, if the provider ADDs something to the order (like another lab panel), the order is updated to reflect this change. Removing or modifying an existing panel, adding a diagnosis, nor modifying the "Assigned To" does not trigger the update.
Similar results happen with other types of orders…
15 votes -
Test Results - Patient Phone Show Primary Phone
Within the Desktop > Test Results area, the "Patient Phone" field displays the "Home" phone number of the patient. This has no dependence on which phone number is set as the primary and/or secondary phone number within the patient's account. It would make sense and be very useful to have the PRIMARY phone number display in this area, regardless of which phone number that would be. With this always displaying a home phone number, the user would need to open the patient's chart in order to determine if that was the correct phone number to call in order to discuss…
13 votesThank you for your feedback on the MicroMD product! We are pleased to inform you that this item has been completed and released in our version 20.2 version of MicroMD.
If you have questions please don't hesitate to contact our teams.
We hope to have further feedback and collaboration with you again soon!
Onwards and upwards!
Product Management
-
Delete Categories of Items from Encounter
When in an encounter we would like to be able to delete an entire category (i.e., Cardiovascular) of items from the encounter. So if there are 5 items listed under Cardiovascular, you would be able to highlight the entire category and delete it which would remove all 5 items under it. Currently you have to delete each item individually.
5 votesv17
-
Stage 2 Core 1B - Radiology orders
Consider looking for the procedure codes in the Referral order (currently they look ONLY for Procedure orders, which they do not order this because it is not done inhouse). This is an extra step of creating orders and marking them done that could be eliminated by looking for the procedure codes in the Referral order section.
1 voteEnhancement completed in version 13.5 . ref id 24844
-
Rules to look at Screening & Prevention as well as the encounter.
I'm not sure what other areas have this same issue, but when a rule is created to remind a user that a particular screening has not been done. Per MicroMD support, the rule will only look at encounters to verify the code and not that the code was used in screening and prevention. Based on this logic users are misled when a screening has actually been done for a patient but the EMR Rule is being triggered saying it has not. MicroMD Log 382102
10 votesThank you for your feedback on the MicroMD product! We are pleased to inform you that this item was released in version 18 of MIcroMD!
Onwards and upwards!
Product Management
-
The PM assigns inaccurate classifications to appointment requests made from the EMR.
When an appointment request is made from the EMR the provider has an option to select an appointment type. On the PM side, when the request is dragged over to a schedule the PM incorrectly assigns a classification to the appointment. The best solution would be to link this between the PM and EMR. This could be done by allowing the PM classifications to be selected in the EMR when the appointment request is made. In the EMR this is labeled Appt Type. I understand from support that this is "working as designed" but seems to really be a mapping…
1 voteEnhancement completed in version 14.. ref id 16905
-
Option to bill for labs other than In House
Currently the EMR has a built in option to bill for an In House lab. Nuestra Clinica Del Valle has a unique situation where they have an "In House" laboratory but actually utilizes an interface with the EMR (Merge) for orders and results. They would like to have an option in the EMR Manager to have the same bill option for In House labs for these labs. When an In‐House lab or procedure has been ordered for a future date. When closing, if the order has
not been already billed from a related encounter, a pop‐up dialog box will ask…6 votesEnhancement will be completed in version 17.0.3
-
Adding Secondary Insurance Fields In Administrative Form Templates
Most of the EMR clients use these forms to send to surgery centers to reserve a time for their patient's surgery. Filling out these forms by hand then faxing them is very time consuming for a practice. With the Administrative Forms and Interfax this task becomes less time consuming. The problem is most of these surgery centers require a secondary insurance. In order to accomplish this currently, the practice needs to add this. I would like to suggest we create a field for this to pull in like the Primary Insurance
1 voteThank you for the suggestion in the future version 13 the plan set concept will be introduced in the EMR which in turn will allow additions to the EMR Admin forms and other areas to have fields for primary, secondary and tert. and the selection of the specific set that will merge.
-
Add User Groups or allow multiple recipients for reminders
Var Name: Main Street Medical
Client Name: Dr. James Bay
Contact Name: Jim Popp
Description of Request: In the New Reminders dialog, allow the "To" block to be populated by multiple recipient names (like mail messages), or make user-defined groups available in the list of users who come up when the "To" button is clicked.Requested Steps to define spec: Either method would allow more than one user to be aware of reminders when they come up on the desktop on the target date of the reminder, and also allow those multiple users to see the reminder under "Reminders" on…
1 votever 18
-
Multiple Page DMS Settings
When you open a document in DMS and modify the settings (such as Zoom, Rotation, etc.) and then switch to another page in the document, all of these settings are reverted to the defaults. They should remain set per the user's choice while moving between pages.
13 votesEnhancement completed in version 14. ref id 25695
-
Need "ALL PROVIDERS" Option Instead of "ALL STAFF" Option
When running Meaningful Use reports (Clinical Quality and Objective) within the EMR, include an option to run for "All PROVIDERS". Currently, if you run the reports for "ALL" providers, it counts all staff, regardless of role within the organization.
For instance, if a front desk user happens to document something in an encounter (such as a no-show, etc.), this front desk user is then counted when running the Meaningful Use report for "ALL" when that is technically incorrect.
The "ALL PROVIDERS" list could be populated by looking at the "Role" of the users in the EMR Manager (for instance, Physician,…
6 votesFilter changes made as required by ONC ver 13.5. Specific multi selection added.
-
History Recorder Shortcut on Encounter Ribbon
When in an encounter, it would be useful to have a button/link to the "History Recorder" instead of having to access the History Recorder from outside of the encounter.
Currently, the only way to access the History Recorder within an encounter is to use an Encounter Wizard. The remaining options for encounters do not have this availability.
2 votesEnhancement completed in version 14. HSMS id 25611
- Don't see your idea?