MicroMD EMR
150 results found
-
Reports which can include inactive charts
Allow the reports feature of the EMR to also pull data from inactivate charts. If it cannot always be done this way, allow the user to select the option to include inactive charts.
Requested Steps to define spec: Key component
Expected Result: This will allow users to run reports on data for a specified length of time. We use reports to monitor progress made for our quarterly outcomes reports and to confirm we are providing the highest level of care available.
Because this is not presently available and data stored in text encounters cannot be retrieved outside of the EMR,…5 votesCompleted in version 11
-
Provide the ability to actually publish document you are looking at from Portal Updates on Desktop
Under portal Updates, we do see different data categories like Medications, Allergies and lab results. Unfortunately, the Publish capability does not allow you to publish the actual document (like for example the lab results) - Under Publish - You have the capability to publish message only, List, Do not publish and Show Log. However, it does not have the capability to publish the actual lab result etc.
8 votesCompleted in version 12.0, reworked the portal updates area for Meaningful Use ref id 21506
-
Ability to write a phone message to document in chart but not send to anyone
Description of Request: Would like the ability to write a phone message in order to document in the chart, but not have to send it to anyone.
Requested Steps to define spec: Would like to add a new phone message, but not have to assign to anyone and be able to mark as completed so it appears in workflow communication and not need further attention.
Expected Result:
Actual Result:
Impact on Workflow:9 votesShould be using a text encounter, patient memo or send a phone msg to self to record in chart. MicroMD ref id 19622
-
All Windows within the EMR could be made full size to the screen
Description of Request: Would like to be able to open all windows within the emr up to full screen size for ease of reading
Requested Steps to define spec: Open emr. open chart. go to any tab and to any area where you can pull up a smaller window such as add windows and be able to maximize to the size of my computer screen.
Expected Result: maximize any window
Actual Result: any of the add windows are smaller and cannot maximize. there is a feature request for encounters to open to full screen. this feature is for any other…7 votesref id 16653 Projected for version 11 release Oct 2015
-
comment boxes too small
Description of Request: Comment boxes on subjective, objective, ros are too small and are hard to read
Requested Steps to define spec: The doctor would like the comment box to be bigger so that it is easier to read. He also wanted it to allow more characters, but it appears in current version there is a 5000 character limit.
Expected Result:
Actual Result: Give result
Impact on Workflow5 votesHSMS ref id 19113 product mngmt will review this item as its next step of development planning. Enhancements will be added to our future version 10 which will release late 2014. Completed in version 10
-
Ability to load encounter for next day
Currently you can only make an encounter for the current day or a past day and I would like to make an encounter for the previous day to help with timing when in clinic that next day
6 votesHSMS internal reference id 18197 version 15.0
-
Default all printing to 12 point font.
Feature Request: would like to be able to default everything that prints out to 12 pt font. Whether it’s an encounter report, patient education, patient care plan, etc., he wants it in 12 pt. He says that 10 pt is just too small. He has mostly older patients and he says they have a hard time reading what he prints.
4 votesHigh Vote item will now be reviewed by product management team to establish when it can be planned to be incorporated into MicroMD ref id 16816. An option for this will be added to the future version 10 release later this year. Completed in version 10
-
Loinc codes for EPDS Questionnaire
Var Name: Community Partners Healthnet
Client Name: Nuestra Clinica Del Valle
Contact Name: Courtney SmithDescription of Request: The client would like to have certain loinc codes associated with answers to the EPDS questionnaire. I have attached a spreadsheet that contains the answers and associated loic codes.
Actual Result: As of right now, the loincs for the questions themselves shows up but not for the answers
Impact on Workflow: Cannot accurately document loinc codes for questionnaire answers given
1 voteEnhancement in version 17.0.1
-
Change default sort to service date, not create date in DMS view
Please change the default sort view in DMS to service date and not create date, or make it a preference setting.
1 voteAdding several sort options and adding preference for user cumstomization. ver 15.0-2
-
Improve the visual indicators between a revised encounter and the revision
The distinction between an encounter that has been revised and the revision encounter are not clear enough and opens the door for medical errors and distribution of outdated encounter notes. Make it clear – either hide the revised encounter from view -or allow a strike through visual indicator etc. or make the working different - perhaps an icon on the summary tab next to a revised encounter or a note on the revised encounter to "see revision encounter".
3 votesSuggestion will be reviewed by development to plan how and when the suggestion can be implemented. We will update this post when further planning steps and implementation date is projected. Projected for version 11 release Oct 2015
-
Main DMS file cabinet would be accessible through the patient file cabinet
The practice would like to be able to view and print documents from the main file cabinet of DMS from the patient file cabinet in the chart in the EMR.
Requested Steps to define spec: Key component
Expected Result:
Actual Result: Give result2 votescompleted can access by selecting the DMS button and then select open file cabinet
-
Behavioral Health Questionnaire Section Shouldn't Need Abbreviation
When creating a new Behavioral Health Questionnaire and creating a new "Section", you have the option of entering in a "Section Abbreviation". However, if you choose not to use an abbreviation, once the questionnaire is loaded within a patient's chart, these section headers do not appear. If a "Section Abbreviation" IS entered on the section header, the section headers appear as would be expected (It displays both the "Section Name" and "Section Abbreviation" fields).
HSMS support states that this would be a feature request for the section headers to display without an abbreviation entered. Nowhere is the user prompted that…
1 voteRef HSMS id 28125 addressed in ver 15
-
End Date for Screening and Prevention
Add end date, age range or allow active dates to be defined in Screening and Prevention.
Requested Steps to define spec: Allows Screening and Prevention programs to be automatically deactivated after a certain period of time or after a certain age. Would be set up in the details along with the begin date and how often it should be repeated.
Expected Result: No way to define an end date
Actual Result: Ability to define an end date
Impact on Workflow: currently have to go in and manually deactivate screening and prevention programs for each patient.Similar to how this suggestion…
8 votesThank you for your feedback on the MicroMD product! We are pleased to inform you that this item has been released in a prior version of MicroMD.
Onwards and upwards!
Product Management
-
Add template for social determinants based on the PRAPARE guide
Add template for social determinants based on the PRAPARE guide.
Expected Result: Standard template for social determinant activity so data is all collected in one place.
Actual Result: Have to put data in the PM and other areas in the EMR and some fields are not reportable.
Impact on workflow: collects all data in the EMR and makes it easier to report on and use for each patient.
6 votesQuestionair will be included in a phase of our clinic refresh within version 17.0.2
-
Patient Education/Procedure Link Improvement
When you add a procedure in an encounter that is linked to patient education there are multiple clicks to add the education. Once adding the procedure you have to click(1) on Administration in the encounter ribbon, click(2) patient education, then click(3) the patient education that is linked. This opens the Patient Education window and you have to click(4) to add this document and click(5) close. (options have been added to reduce these actions see manual) If a practice has specifically linked patient education to a code once that procedure has been added, a Yes or No pop could ask would…
7 votesChanges made ref id 26527
-
Check-in kiosk for registration and medical info update in lobby
Consider integration or in house build of a kiosk that allows patients to check in the lobby using ipad or other mobile device. Allows patient to review and update information, pay their copay and any outstanding balance, and view/update/complete medical information like medical history, medication history, allergies, reason for current visit and review of systems that is associated with current visit. That information is automatically available or updated in EMR and PM system. See attached diagram to show options that a third party company phreesia has for patient check in kiosk.
1 voteEnhancement added for online e registration and checkin with partner Relatient version 17.0.2
-
Provide the ability to "deselect all" when editing Portal Update records
At present when editing portal update records the system defaults to "Include all" and there is no option to "exclude all" so that the provider might selectively determine which portions of the CDA to publish to the patient. This has resulted in a serious workflow problem for my providers. For example, an 80-year-old patient who has been seen in the office multiple times in the last few months is receiving a full CDA every time there is an update to her labs or other related records. In order for the provider to selectively send only the lab related information the…
1 voteDuplicate of internal id 25666 completed in version 13.5.
-
Adding problems to problem list
Our providers would like, when they are adding a problem to the problem list from the encounter, for the problem to be greyed-out if it's already in the problem list. That way they cannot add the same problem to the problem list multiple times.
10 votesThank you for your feedback on the MicroMD product! We are pleased to inform you that this item was released in Version 19.
Onwards and upwards!
Product Management
-
alphatize quick text manager
I have problem to locate the templates that I have made before , to edit
1 votever 18
-
CQM Reports show criteria met
Quality Improvement team would like the CQM reports to show how the patients met the criteria for the numerator.
For Example: NQF0059 (Diabetes by A1C)
This report puts any patients into the numerator that 1) had an A1c greater than 9% during the measurement period, or 2) did not have an A1C performed during the measurement period. The EMR has to know which of the criteria the patient met in order to be in the numerator. So can it not give us that information?I need to know out of these patients, which ones had a high A1C and which…
1 voteEnhancements made to show patients in numberator, exceptions etc. If additional report is necessary speak to your support rep for an available report or custom report.
- Don't see your idea?