MicroMD EMR
199 results found
-
appointment day setup
I would like to be able to pick appointment days and load these into customize the day. For example if one of my providers are changing their schedule just by a day for a vacation I could move that template. Meaning his normal Thursday day needs to be moved to a Wednesday. Instead of re creating this every time I could pick a day in customize the day.
1 vote -
Desktop > Orders (save filter)
Our workflow is to assign orders to a group and the nurse working with a certain provider will filter the Orders list.
Need to be able to set a filter to only show orders from the provider staff will be working with that day. According to staff, as soon as the nurse leaves that window, the filter defaults back and is thus no longer filtering for orders.
We use this workflow because it is much easier for the nurses to filter the provider orders than the provider to have to change every single order in an encounter based on staffing.
1 vote -
Associated Diagnosis on CliniGuides
I would love to be able to create ? (mark as question) items under the associated diagnosis option when making CliniGuides. This would just simply be a time saver with ordering labs. When you have labcorp staff working in the EMR, our staff have to complete the window, Labcorp staff are not allowed to pull in the codes. Having proper codes available for selection with the "mark as question" would make this job easier in the encounter for our staff.
3 votes -
Deactivate portal account from EMR
We have a patients who have decided not to use their portal. I deactivate their account on the portal admin side, so they should not receive any more messages. However in the EMR, they still show an active portal account. This leads the provider to believe that the patient is receiving the message, lab results, etc. when in reality they are not. Can you add a way to deactivate the portal account in the EMR?
3 votes -
Immunizations - Reconcile button (add all)
When you click the Reconcile button in the immunization section. I click Import from Registry. When the list populates, it is LARGE and an ADD ALL would be great.
2 votes -
Customize Care Plan Instructions
We would like to be able to customize what prints on the care plans. For example, when a provider puts in a referral order the care plan says "Please call --XXXX to schedule your appointment." This does not reflect our workflow, but we do not have the ability to change this on the care plan.
1 vote -
Spell check in DMS and EMR letters
Please add spell check to the MicroMD DMS. When you write a letter in the EMR, spell check is available. But if you save it and go back to edit it later, spell check is no longer an option. Thank you!
2 votes -
Improvement to Check In update to EMR
We are asking that, if they uncheck the checkin on a patient in the PM, since we already send that to the Change History in the EMR, that we would remove the checkin in the EMR as well.
The way it is working now the practice has to go into the EMR and manually remove them from being checked in.
9 votes -
Screening & Prevention - Auto Apply/Refresh
We have many S&P templates created with rules applied. What would be great would be if those would auto-apply/refresh based on the user preference when you start an encounter, open the patient monitor, or open a chart. We do not want to required staff to navigate to S&P section for that process to happen.
The majority of the time a workflow starts in the Desktop on Scheduled Visits and the staff will either access the Patient Monitor or start the Encounter. Auto-refresh should happen then trigger looking at S&P and we would want those to catch all the updates that…
4 votes -
Pack history calculator/report
We would like a pack history calculator added to the medical calculators. Pack history is = packs of cigarettes smoked per day X number of years smoked. This outcome is needed to determine if the patient qualifies for lung cancer screening. If this calculator could also be located in the habits window, that would be extremely helpful, so they can input the results there.
If the pack history could be entered in a structured format in the habits area, that would be even better. We need to be able to run a report of patients who have at least a…
4 votes -
Referral order print parent/guarantor name and address
Referral orders need to print guarantor's name and address. A pediatric practice is sending referrals to the hospital and the hospital is returning them asking for the parent/guarantor's information. This is delaying getting the service scheduled.
2 votes -
lab order
I would like a faster way to add diagnosis codes to a lab order. Often, multiple labs are being done for the same dx code. It would be helpful to be able to have a way to do this. Here are some possible ways to help make this faster.
Also, they could apply to chaning a lab order from one lab to another. Since this isn't done from a note, you have to search for the dx code for each lab ordered.
- Once a dx is added to one lab test, the drop arrow could include that dx so that…
2 votes -
Encounter > Plan shifts cursor to top when deleting an item
In the Encounter (using the Builder) under the Plan tab...
If you have several sections like Procedures, Labs, etc and you delete something from one of the lower sections, it re-positions the cursor back up to the very top section. Can this be changed to position it in the section you were deleting from?
4 votes -
Send and Attach Letters to Charts
There are many instances where a practice can be sending a letter to a large amount of patients, such as a provider leaving. There is currently no way in the software to document a letter in a large amount of patient charts.
If there was a way to create and attach a letter from the reports section or the group encounters section of the EMR, it would be very beneficial. This allows the clinic to use a mail merge letter and attach it to all the charts instead of doing it one by one.
4 votes -
Add a Not Equal To option for reports
A Not Equal To option is needed for all reports where a Equal To option is currently.
Specifically a client was asking for this on a procedure report to see a list of patients who have not had a COVID-19 vaccine at their clinic. Ideally, this would be needed for any report where you wanted to see a list of patients who did not have a specific ICD-10, CPT, CVX codes etcetera in their chart. You could also use this for the Ethnicity, Family Size, Gender Identity, Marital Status, Race, etcetera fields to isolate an item you need to exclude.…4 votes -
Labs
Mark as viewed is missing from lab results this is requiring a 2 click step instead of one. Now I have to click view grouped then mark as viewed. When a mark as viewed option is in other areas such as desktop manager. This is greatly decreasing productivity. Sometimes there is only 1 lab. Please add
1 voteThank you for your feedback on the MicroMD product! We are pleased to inform you that this item has been approved for consideration and is in active development! It is scheduled to be released in our next upcoming version.
If you have questions in the meantime, please don't hesitate to reach out to our teams.
We look forward to continued collaboration with you!
Onwards and upwards!
Product Management
-
Reoccurring orders in lab order section
We need a "reoccurring order" button in the lab order section in the patient's chart. It's currently only an option from the encounter note. When you do reoccurring labs from the encounter note, it creates a separate order for every panel ordered. Example: provider wants a CBC, CMP, and TSH performed every three months. When ordered from the encounter note, it creates three separate orders every three months. This is a total of 12 orders in one year, where it should only create 4 orders in one year, with each order containing 3 panels. If you could add this button…
1 vote -
Scheduled Visits - Link Enc to Appt
When in the Scheduled Visits area you can click New Encounter and it links the Encounter to the Appt for the PM Reconciliation report. Can you add a practice setting that will also link the Encounters when created after clicking Patient Monitor then New Encounter and/or if someone opens the chart and clicks New Encounter it prompt them if they need to link it to the appt and ask them to select the appt.
2 votes -
Disable or Warn on "Request Sent" For Outbound Lab Orders with Interface
For practices that have an outbound laboratory interface (e.g., LabCorp, Quest, etc.), it is required that the staff switch the status of the order to "Specimen Collected" in order to send the order electronically. However, even after numerous trainings occasionally, staff still switch the status to "Request Sent" thinking that the order will be sent electronically and, obviously, it will not. It would be great if the system would prevent this option from being selected for practices with these interfaces. If it cannot be prevented, at least include a pop-up warning message stating something similar to "Choosing this status will…
4 votes -
SVE - Visit Test/Plan to be able to use the PERFORM/VIEW button for Screening Orders
Include the ability to use the PERFORM and VIEW buttons for Screening Orders (just like you can with other items like labs/procedures)
When adding a certain screening order to the area, you should be able to click the Perform button and the screening appear to complete. After completing it, you should be able to click the View button and it retrieve the screening.
2 votes
- Don't see your idea?