MicroMD EMR
321 results found
-
Portal Update Provider Filter
The provider filter does not work under portal updates for lab results that have been imported electronically from our lab. All lab results are assigned to the user"Cliniflow". This is causing a problem for our providers, because they have to sort through a long list of patients instead of being able to quickly view the lab results that need to be published for only their patients.
1 voteThank you for your suggestion however this represents an interface issue please contact your support representative to work out the details.
-
Stock Management Reporting
We would like to add patient name, DOB, address, and lot number expiration (if applicable) to the Stock Management Transaction Report. This information is required to report to NC Immunization Registry and, until we have the ability to electronically transmit this data, we would like to produce the report to expedite the manual process.
1 voteComplete with a custom report for the client.
-
Provide better tools for Reporting
We need a better reference for clients who want to do their own reporting. The zip file entitled "PM plus EMR_Files" I received when I requested a "Table Map" has been of marginal value. I need a document that outlines exactly what each column in each table is, what the data in it is (not just whether it's an integer or text field etc... but something like "Description of Laboratory Test Performed etc...), and where ALL of the links to the Key columns are. I waste an incredible amount of time searching for the data I need to run the…
1 voteThank You for your suggestion however this is a forum for application suggestions please contact your support representative to inquire about this need.
-
date and time stamp
all test results should have a date and time stamp when they are viewed. Also once it is viewed it should show as "viewed" We have to go thru 3 steps to show it as viewed.
1 voteThank You for your suggestion. The viewed date is part of the change history or audit details for each result necessary per certification.
-
Immunazation scrollbar
when in a wizard template,or in patient chart and viewing immunization from patient monitor, it is unclear and one is not able to view the whole immunization chart at once.The scroll bar that is in the system is hard to get to very small since in a scoll bar already..I suggest making the grid visible on one page without a scroll bar or making the scroll bar more accessible so doesn't frustrate the doctor.
1 voteThank you for your suggestion. This is a duplicate to a suggestion that is already being planned for future enhancement.
-
Internal Mail Messages
When replying in the Internal Mail, the subject line continues to put "Re" multiple times depending on how many replies the message has. (i.e., if the message was replied to 5 times, the subject line states "Re: Re: Re: Re: Re:"). Would like the system to only place "Re:" in the Subject line once if the message is a reply, similar to how Microsoft Outlook does.
1 voteThank You for your suggestion this is a duplicate to a previous suggestion and will be closed since it is already in the planning stages for a future version.
-
ability to batch labs by patient name and lab result date
The system should have the ability to select tests by date done and patient name, rather than having to name each test to use the batch basket feature. This is very time consuming.
1 voteclosing 1 vote in 5yrs, group view may help user with this need.
-
RX
WE DISPENSE MEDS BUT THERE IS NOT ANY CHOICE ON PRESCRIPTION PROCESSOR WINDOW. IT IS GOOD IDEA TO ADD THIS CHOICE TOO AS " DISPENSED "
1 voteThank you for your suggestion however MicroMD is not a medication dispensing software which requires additional certification from the FDA and the board of pharmacy. There are many fine medication dispensing applications available which may have the ability to interface with Surescripts. CarePoint is one of the applications we have interfaced with at a current cient site.
-
Request to add other categories to Examination Type in the Encounter Header
We have a client whose specialty isn't one of the pre-determined types of visits. Therefore, their only option is to choose <None> as the Examination Type in the Encounter Header.
We would like to see Screening Exam, specifically endoscopic screening, as one of the choices of Exam Types available in the Encounter Header.
1 voteclosing 1 vote in 5 yrs
-
Transcription Button
I have clients that like to start the encounter a few days ahead of time to get a jump on the schedule. When they do this and go into the encounter on the day the patient shows and edits the date, the transcribed button is checked. If they miss this then the encounter shows transcribed insteat of pre encounter. I would like to suggest this option be linked to the roles. If you do not have the transcriptionist role checked, then this button becomes in active on the encounter header
1 voteThank You for the suggestion however this has been addressed as an issue recently look for a fix in a future update.
-
Desktop item for Outstanding Lab Items
Provider would like an item on the desktop that lists all lab orders that have not been completed/resulted. This would allow them to monitor to make sure all orders are being completed.
1 voteThis functionality is already availble from the orders area using the filters in the desktop orders area.
-
When a user opens the dialog to add a piece of medical information, set the focus to the dropdown for the common list for that category
When a user goes to, for instance, Social History, and presses the Add button to add an item, in the dialog box that opens, set the focus to the dropdown for the Social History Common list instead of No history of. If it was set to the common list for the category, the user could start to type immediately, and get on or close to the common list item they want to add. As it is now, they have to go to the mouse to set the focus manually on that dropdown, and that takes time.
Requested Steps to define…1 voteclosing 1 vote in 5yrs
-
Co-sign reports: Time range and list of encounters reviewed ?
State requires 10% of NP charts co-signed. Settings work fine. Report is NOT ACCURATE unless both NP and MD start at the same time (NP started 4 years ago, new MD - reports show WAY LOW percentage (had not used before). Would also be nice to be able to print off a list of encounters that were co-signed, instead of just a number report and tell the inspector to go look at random charts to see the actual co-sign.
1 voteReport options have been added to acquire the requested data reports.
-
PCP to show in Bill Builder and Billing Prep report
Description of Request: PCP to show in Bill Builder and print in Billing Preparation report
Requested Steps to define spec:
- From Patient chart
- Encounter Tab
- Admin button
- Bill Builder opens up
- Print button
- Print button
Expected Result:
when printing the billing preparation report from the Bill Builder, the PCP along with the Referring Provider must print. Also, the PCP should show in the Bill Builder as well.Current Result:
currently the client must select the PCP as the Referring Provider in order for this information to pull on the Bill Builder and print on the Billing Preparation report.Impact on…
1 vote -
The ability to change the results to on an order
The ability to change the 'results to' on a lab order during the encounter or the ability to edit the order and change the results to after the order is entered
Our busy obgyn practice only forwards the results onto the doctor if the results are abnormal. If the results are normal they go to the nurse and do not require the doctor to view them1 voteClosing 1 vote in 5yrs. see note
-
When printing/viewing labs in 'Medical Information Report' the ordering facility should be shown
As labs are often received from other providers and facilities, it would be helpful to know who the ordering provider was. This information available when viewing them in 'Test Results' under 'Lab Result Detail' labeled 'Performed At.' However, when printing these labs for records requests, or viewing multiple date ranges in 'Medical Information Report', the ordering provider is not shown.
1 voteclosing 3 votes in 5 yrs
-
Internal mail
Messages sent to a group plus specific staff members send multiple copies of message to each recipient. Example: Message from provider to Clinical Staff group (which has four members) plus referral coordinator results in five copies of the same message being sent to each member of the Cinical Staff group and five copies to the referral coordinator. There is no functional purpose to this and it slows our workflow.
1 voteThis item is being closed this is not a suggestion this would be a bug that should be reported to your support representative.
-
Add 'Bill Type' column to Lab Requisition Report
Ad a field or column in the Lab Requisition Report to be able to determine how each lab order is billed (patient, insurance). Having this field will allow the practice to reconcile all orders that should be billed each day.
1 voteclosing 1 vote in 5yrs
-
Count all adults with normal BMI in numerator for purposes of NQF0041 (Adult weight screening and followup)
Currently it is necessary to enter code G8420 if an adult patient has a normal BMI in order for that patient to count in the numerator for that Meaningful Use element. Instead, the system should automatically count that patient as meeting the requirement, thus saving our staff the hassle of having to add the code, and making the data more accurate.
1 voteThank You for your suggestion for further information about measures please contact software support if they have not already reach out to you directly.
-
For Quality Measures treat meds in active LTM list as prescribed (e.g. aspirin)
For our clinic we are unable to generate Meaningful Use reports or other data for measures involving aspirin use because the system is searching for a PRESCRIPTION for aspirin. We don't write prescriptions for aspirin, but we include aspirin on the LTM when it is recommended and the pt agrees to take it. The measure described by NQF clearly defines aspirin USE as recommended, and makes no mention of a prescription. The same should apply to other medications, as sometimes they are prescribed by a consultant and not by us, but do appear on the LTM list.
1 voteThank You for your suggestion for further information about measures please contact software support if they have not already reach out to you directly.
- Don't see your idea?